Yamaha Triples
Search Forums | Statistics | User Listing Forums | Calendar | Albums | Chat | Skins | Language
You are logged in as a guest. ( logon | register )


Frame Powdercoating
Moderators: Moderators

View previous thread :: View next thread
   Modifications -> Frame/Fenders/Seat/Gas TankMessage format
 
RugerXS750
Posted 2017-03-31 11:21 PM (#152994 - in reply to #152988)
Subject: Re: Frame Powdercoating



Member

Posts: 26
25
Location: Fort Worth, TX
I just stripped mine down to the frame for powder coating in February, the only bearings you need are swing arm and steering stem. All Ballz racing has all of them. I recommend using a blind hole bearing puller for the races of the swing arm. Autozone has one you can use for "free" with their loan a tool program. The lower steering stem is a pain, I had to cut it off with a Dremel tool and lots of hammering.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

 

Running MegaBBS ASP Forum Software
© 2002-2017 PD9 Software
(Delete all cookies set by this site)